Features
*-Atheros eXtended Range technology
*-300Mhz, 16MB SDRAM, 4MB Flash
*-1x Compex WLM200N5-23 ESD 23dbm MiniPCI card pre-installed
*-Built-in internal high sensitivity dual-polarization antenna , 8dbi for 2.4GHz band or 17dBi for 5GHz band
*- Spare external antennae connector
*-Support Power-over-Ethernet (PoE passive)
*-Supports 64/128-bit WPA, WEP, TKIP, AES, IEEE802.1x authentication
*-Embedded NOR flash, and support NAND flash memory expansion
*-Antenna Alignment
*-Build in with Grounding Terminal
*-Surge arrestor support
*-Weatherproof casing

Multiple SSID
 Supports up to 4 virtual access points (VAP) per radio (concurrent dual band possible), with unique BSSIDs. Traffic from each VAP can be tagged to a unique VLAN and /or bridged if required. Each VAP will be able to configure their own security (WPA, WEP, TKIP, and AES).

Long Range Support
 Suitable for long-range wireless deployment with Proprietary Long Distance Algorithm for ACK and CTS timeout adjustment support.
 Provides recommended values for the parameters and at the same time allow for manual fine-tuning for optimal performance.

Antenna Alignment
 Antenna Alignment feature allows the system integrator to align the antenna for best signal strength.


FIRMWARE INFORMATION
Operating Modes
 Access Points
 Client
 RootAP / Transparent Client (Work in Progress, FW upgrades)
 Repeater (Work in Progress, FW upgrades)
 Wireless Adapter (Work in Progress, FW upgrades)
 Wireless Routing Client (Work in Progress, FW upgrades)
 Gateway
WAN Type
 Static IP
 Dynamic IP
 PPPoE
 PPTP
 L2TP
Device Management
 HTTP / HTTPs Web Server
 SNMP V2c
 Telnet / Secure Shell (SSH)
Data Capture & Notification
 Event Login (Syslog)
 Detailed Statistics per Client
Virtual Access Point (VAP)
 Up to 4 SSIDs with unique MAC Addresses (BSSID)
 802.1q VLAN tag per VAP with Bridging
 Configurable Security (WPA, WEP, TKIP, AES, MAC Filtering) per VAP
Advanced Features
 Built-in DHCP server
 Transmission Power Control (One dB per step)(Work in Progress)
 Closed System (Suppress SSID)
 Transmission Rate Control
 Spanning Tree Protocol

• Suitable for Long Range wireless deployment with high receiver
  sensitivity.
• Ideal as CPE device connecting PtP with a central AP
• Device power from PoE through ethernet cable provide flexible installation.
• IEEE 802.11h (DFS & TPC)
• Enables worldwide operation through support for standards-based
• Dynamic Frequency Selection (DFS) and Transmission Power Control (TPC)
• SNMP Traps enable an agent to notify the management station of significant events by way of an unsolicited event.
• Antenna Alignment Allows user to adjust their external antenna to receive the optimum throughput.
• DHCP Relay (Only in Gateway or Wireless Routing Client Mode) Allows DHCP Clients on different subnets to get IP address from central DHCP server.
• Remote Upgrade of Firmware Allows user to upgrade their firmware through Telnet/SSH
  Parallel Bandwidth l(Only in Routing Mode) Provide scalable Internet bandwidth with Load Balancing and Fail-Over Redundancy.
• RIP 1 / 2 (Only in Gateway or Wireless Routing Client Mode) Routing Information Protocol Version 1 / 2