Features
*-Atheros eXtended Range technology
*-300Mhz, 16MB SDRAM, 4MB Flash
*-1x Compex WLM200NX-20 20dbi MiniPCI card pre-installed
*-Built-in internal high sensitivity dual-polarization antenna , 8dbi for 2.4GHz band or 13dBi for 5GHz band
*- Spare external antennae connector
*-Support Power-over-Ethernet (PoE passive)
*-Supports 64/128-bit WPA, WEP, TKIP, AES, IEEE802.1x authentication
*-Embedded NOR flash, and support NAND flash memory expansion
*-Antenna Alignment
*-Build in with Grounding Terminal
*-Surge arrestor support
*-Weatherproof casing

Multiple SSID  
• Supports up to 4 virtual access points (VAP) per radio (concurrent dual band possible), with unique BSSIDs. Traffic from each VAP can be tagged to a unique VLAN and /or bridged if required. Each VAP will be able to configure their own security (WPA, WEP, TKIP, and AES).
 
Long Range Support
• Suitable for long-range wireless deployment with Proprietary Long Distance Algorithm for ACK and CTS timeout adjustment support. 
• Provides recommended values for the parameters and at the same time allow for manual fine-tuning for optimal performance. 
 
Antenna Alignment
• Antenna Alignment feature allows the system integrator to align the antenna for best signal strength.
 
 
FIRMWARE INFORMATION
 Operating Modes 
 • Access Points
 • Client
 • RootAP / Transparent Client (Work in Progress, FW upgrades)
 • Repeater (Work in Progress, FW upgrades)
 • Wireless Adapter (Work in Progress, FW upgrades) 
 • Wireless Routing Client (Work in Progress, FW upgrades) 
 • Gateway
 WAN Type 
 • Static IP
 • Dynamic IP
 • PPPoE
 • PPTP
 • L2TP
 Device Management 
 • HTTP / HTTPs Web Server
 • SNMP V2c
 • Telnet / Secure Shell (SSH)
 Data Capture & Notification 
  • Event Login (Syslog)
 • Detailed Statistics per Client
 Virtual Access Point (VAP) 
 • Up to 4 SSIDs with unique MAC Addresses (BSSID)
 • 802.1q VLAN tag per VAP with Bridging
 • Configurable Security (WPA, WEP, TKIP, AES, MAC Filtering) per VAP
 Advanced Features 
 • Built-in DHCP server
 • Transmission Power Control (One dB per step)(Work in Progress)
 • Closed System (Suppress SSID)
 • Transmission Rate Control
 • Spanning Tree Protocol

• Suitable for Long Range wireless deployment with high receiver 
   sensitivity. 
• Ideal as CPE device connecting PtP with a central AP
• Device power from PoE through ethernet cable provide flexible installation.
• IEEE 802.11h (DFS & TPC) 
• Enables worldwide operation through support for standards-based  
• Dynamic Frequency Selection (DFS) and Transmission Power Control (TPC) 
• SNMP Traps enable an agent to notify the management station of significant events by way of an unsolicited event.
• Antenna Alignment  Allows user to adjust their external antenna to receive the optimum throughput.
• DHCP Relay (Only in Gateway or Wireless Routing Client Mode)  Allows DHCP Clients on different subnets to get IP address from  central DHCP server.
• Remote Upgrade of Firmware  Allows user to upgrade their firmware through Telnet/SSH
  Parallel Bandwidth l(Only in Routing Mode)  Provide scalable Internet bandwidth with Load Balancing and Fail-Over Redundancy.
• RIP 1 / 2 (Only in Gateway or Wireless Routing Client Mode)  Routing Information Protocol Version  1 / 2