Features
*-Atheros eXtended Range technology
*-300Mhz, 16MB SDRAM, 4MB Flash
*-1x Compex WLM200NX-20 20dbi MiniPCI card pre-installed
*-Built-in internal high sensitivity dual-polarization antenna , 8dbi for 2.4GHz band or 13dBi for 5GHz band
*- Spare external antennae connector
*-Support Power-over-Ethernet (PoE passive)
*-Supports 64/128-bit WPA, WEP, TKIP, AES, IEEE802.1x authentication
*-Embedded NOR flash, and support NAND flash memory expansion
*-Antenna Alignment
*-Build in with Grounding Terminal
*-Surge arrestor support
*-Weatherproof casing

Multiple SSID
• Supports up to 4 virtual access points (VAP) per radio (concurrent dual band possible), with unique BSSIDs. Traffic from each VAP can be tagged to a unique VLAN and /or bridged if required. Each VAP will be able to configure their own security (WPA, WEP, TKIP, and AES).

Long Range Support
• Suitable for long-range wireless deployment with Proprietary Long Distance Algorithm for ACK and CTS timeout adjustment support.
• Provides recommended values for the parameters and at the same time allow for manual fine-tuning for optimal performance.

Antenna Alignment
• Antenna Alignment feature allows the system integrator to align the antenna for best signal strength.


FIRMWARE INFORMATION
Operating Modes
• Access Points
• Client
• RootAP / Transparent Client (Work in Progress, FW upgrades)
• Repeater (Work in Progress, FW upgrades)
• Wireless Adapter (Work in Progress, FW upgrades)
• Wireless Routing Client (Work in Progress, FW upgrades)
• Gateway
WAN Type
• Static IP
• Dynamic IP
• PPPoE
• PPTP
• L2TP
Device Management
• HTTP / HTTPs Web Server
• SNMP V2c
• Telnet / Secure Shell (SSH)
Data Capture & Notification
• Event Login (Syslog)
• Detailed Statistics per Client
Virtual Access Point (VAP)
• Up to 4 SSIDs with unique MAC Addresses (BSSID)
• 802.1q VLAN tag per VAP with Bridging
• Configurable Security (WPA, WEP, TKIP, AES, MAC Filtering) per VAP
Advanced Features
• Built-in DHCP server
• Transmission Power Control (One dB per step)(Work in Progress)
• Closed System (Suppress SSID)
• Transmission Rate Control
• Spanning Tree Protocol

• Suitable for Long Range wireless deployment with high receiver
  sensitivity.
• Ideal as CPE device connecting PtP with a central AP
• Device power from PoE through ethernet cable provide flexible installation.
• IEEE 802.11h (DFS & TPC)
• Enables worldwide operation through support for standards-based
• Dynamic Frequency Selection (DFS) and Transmission Power Control (TPC)
• SNMP Traps enable an agent to notify the management station of significant events by way of an unsolicited event.
• Antenna Alignment Allows user to adjust their external antenna to receive the optimum throughput.
• DHCP Relay (Only in Gateway or Wireless Routing Client Mode) Allows DHCP Clients on different subnets to get IP address from central DHCP server.
• Remote Upgrade of Firmware Allows user to upgrade their firmware through Telnet/SSH
  Parallel Bandwidth l(Only in Routing Mode) Provide scalable Internet bandwidth with Load Balancing and Fail-Over Redundancy.
• RIP 1 / 2 (Only in Gateway or Wireless Routing Client Mode) Routing Information Protocol Version 1 / 2