Compex WiFi, WODASIGN Homeplug, networking technology and X-mini eshop,

COMPEX MMC543HV N526dBm MIMO Classic 2T2R AP 802.11a/n 300Mbps, [6015]	1530,- Kč +20% tax: 1836,- Kč
	Availability: In stock - Usually ships in 1-2 business days

COMPEX MMC543HV N526dBm MIMO Classic 2T2R AP 802.11a/n 300Mbps,

Click to enlarge

Model : MIMO Classic HV 23/26dBm ESD 5GHZ, 802.3af POE support

part no: MMC5N26 - MMC5N26HV 6D03AFOE

complete product datasheet click here.
complete radio card datasheet click here.

MIMOClassic is a high-performance indoor Access Point with integrated PoE. Using Atheros AR7130/AR716x network processor of speed 300MHz , coupled with latest 802.11n wireless technology enable it to support high-speed data transmission of up to 300 Mbps.
Compex firmware on MIMOClassic supports AP and Client modes makes it a versatile device that can operate as an AP or Client. MIMIClassic also incorporates features that are useful to system integrators, such as signal strength indicators that shows device installed at a particilar location has good or poor signal reception, coupled with Syslog for event logging it keeps network administrator informed of the operation status constantly.

Please read this test report about 3,2km PtP link with 109Mbps performance !! Complete with configuration description,signal parameters, troughput and latency. Compared with NS M5 results - COMPEX MIMO series product can achieve 10% better troughput !!. Superchannel feature support (4,9-6,1GHz and scalable channel width - 5/10/20/40MHz). Usefull can be for tag vlan operators this new VLAN support feature.

Features

Atheros XSPAN technology
MIPS 24K-family network processor speed 300MHz
IEEE 802.11n draft 2.0 compliant and backward compatible with 802.11a
Dual-band 2 x 2 MIMO spatial multiplexing technique
Supports up to 300Mbps physical data rates
Delivers 10 times the throughput and widen twice the range of legacy 802.11a/g
Maximum 20dBm output Power (MiMo aggregate 23dBm)
Supports IEEE802.11i , IEEE802.1x authentication
Transmission Power Control (TPC)
Dynamic Frequency Selection (DFS) for 5GHz band
Supports 802.11af and Passive Power-over-Ethernet (PoE)
2 x RP-SMA Connector and Antenna
Surge arrestor support(Optional)
Signal Strength LEDs Indicator

Compatible 3rd Party Firmware : OpenWRT, DD-WRT

FIRMWARE SPECIFICATIONS
Multiple SSID
Supports up to 4 virtual access points (VAP) per radio, with unique BSSID. Each VAP can configure their own security
Long Range Support
Suitable for long range wireless deployment with Proprietary Long Distance Algorithm of ACK and CTS timeout adjustment support.
Provides recommended values for the parameters as well as allow for manual fine-tuning for optimal performance.
Signal Strength Indicators
LEDs are adjustable to display 4 different level signal strength
Variable Spectrum Bandwidth Support
Options to select operation over 5MHz,20MHz and 40MHz spectrum bandwidth

FIRMWARE INFORMATION
Operating Modes
Access Points
Station
Station WDS
Repeater WDS
Wireless Adapter
Station + Router
Access Point + Router

WAN Type
Static IP
PPPoE
Dynamic IP

Device Management
HTTP / HTTPs Web Server
SNMP V2c
Telnet / Secure Shell (SSH)

Data Capture & Notification
Event Login (Syslog)
Detailed Statistics per Client
Virtual Access Point (VAP)
Up to 4 SSIDs with unique MAC Addresses (BSSID)

Advanced Features
Built-in DHCP server
Transmission Power Control (One dB per step)
Closed System (Suppress SSID)
Transmission Rate Control
Spanning Tree Protocol

OTHER PROMINENT FEATURES DESCRIPTION
Long Range Parameter Settings
Suitable for Long Range wireless deployment with high receiver sensitivity.

CPE Point-to-Point (PtP)
Ideal as CPE device connecting PtP with a central AP

Power with PoE
Device power from PoE through ethernet cable provides flexible installation.

IEEE 802.11h (DFS & TPC)
Enables worldwide operation through support for standards-based Dynamic Frequency Selection (DFS) and Transmission Power Control (TPC)

SNMP Trap
SNMP Traps enable an agent to notify the management station of significant events by way of an unsolicited event.

Signal Strength LEDs Indicators
LEDs are adjustable to display 4 different level signal strength

DHCP Relay (Only in Gateway or Wireless Routing Client Mode)
Allows DHCP Clients on different subnets to get IP address from central DHCP server.

Remote Upgrade of Firmware
Allows user to upgrade their firmware through Telnet/SSH

RIP 1 / 2 (Only in Gateway or Wireless Routing Client Mode)
Routing Information Protocol Version 1 / 2
Tag and Untag VLAN/VLAN Pass-through
a.Tag VLAN Pass-through mode in AP/Transparent Client link
b.Wireless untag Vlan to Ethernet Tag Vlan mode
c.Wireless tag Vlan to Ethernet Tag Vlan mode

MMC543 TECHNICAL SPECIFICATIONS SYSTEM INFORMATION
Processor Atheros AR7130/300MHz Memory Size 32MB (max 64MB optional) DDR SDRAM NOR Flash 4MB (max 16MB optional)
LAN Interface 1 x 10/100 BASE-T Ethernet Port Antenna 2 x 2dBi detachable SMA antenna Power Consumption 6.4Watts(host board and 20dBm radio)
Power Supply 24V to 48V DC, power adapter and injector included Power method Passive PoE(range 24V-48V DC), 802.3af PoE(48V-56V) or DC Jack
Certification FCC, CE RoHS Compliant Yes
Weight 260 grams Humidity Operating: 5% to 95% (non-condensing) Storage: Max.90% (non-condensing)
Temperature Range Operating:-20ºC to 70ºC Storage: -40ºC to 90ºC
Dimension 145 x 132 x 41 mm (H x W x D)

11n standard uses OFDM modulation and is therefore perfectly legal to operate these facilities under the general authority as 11a/b/g.

The speed at which the devices communicate determine the so-called modulation schemes and code MSC. These are defined total 31st MSC 0-7 uses one antenna to transmit and receive (so-called single stream) It is possible to have a standard width of 20 MHz channel, but for higher speed is selected to be 40 MHz. MSC7 theoretical maximum speed of 150 Mbps and is used only one antenna. Real rates are above 70 Mbps, but we'll see how it will be in our other tests.

MSC 8-15 adds MIMO (Multile Input Multiple Output), it is the use of multiple antennas on both sides. These schemes specifically 2 antennas (known as MIMO 2x2). Not so that one antenna transmits and one receives, but always send and receive both antennas. Is used here to increase the speed of phase shifts (very simply say). These schemes used innovations products such as MIMO Junior, MIMO Station, Wodasign 11N router and a theoretical maximum speed is 300 Mbps. The measurements we showed that it is preferable to using separate antennas use different pairs of polarization antennas. The new MIMO antenna BOX, DUPLEX JIROSU or AirMAX from UBNT already own 2 antennas have, so just connect using the equipment. Indicates the maximum real rate of about 150 Mbps. We measured a short distance where the max speed of just under 100 Mbps. Detailed we measured the links at around 200 to 600 meters and the speed is always around 75 Mbps full duplex. Detailed measurements on links 2 to 4 km you can see bellow.

Current Reviews: 2

For more information, please visit this products webpage.

This product was added to our catalog on Monday 23 August, 2010.

Customers who bought this product also purchased

COMPEX iWaweport WLM200NX 2T2R 802.11N a/b/g/n minipci card 20d	COMPEX Pasive POE+6P2412EU (injector) 24V for WP54/WP543 series+	COMPEX Pasive POE+6P48V30W (injector) 48V for WP54/18/188 seri
COMPEX iWaweport WLM200N5-23dBm-ESD (2T2R)5GHz 802.11a/n miniPCI	COMPEX WP543AHV two slot board AR7161 680MHz,2xminiPCI,802.3afPO	COMPEX Active POE+ (injector only) 48V 802.3af 6A48V15WEU